|
Q7
You work as network administrator at CertKing . You are configuring a Cisco router for the CertKing
network. You want to apply an access control list on an interface of the router.
What command should you use?A. permit access-list 101 outB. ip access-group 101 outC. apply access-list 101 outD. access-class 101 outE. ip access-list e0 outAns: B
Explanation:
To enable an ACL on an interface and define the direction of packets to which the ACL is applied, the ip
access-group command is used. In this example, the access list is applied to packets going out of the
interface. Packets coming in on the interface are not checked against access list 101.
Q8
You are a technician at CertKing . Your newly appointed CertKing trainee, Fernanda is unsure of the
distinction between routed and routing protocols.
How would you explain the distinction to her? (Choose all that apply.)A. A routing protocol is assigned to an interface and determines the method of packet delivery.B. A routed protocol is assigned to an interface and determines the method of packet delivery.C. A routing protocol determines the path of a packet through a network.D. A routed protocol determines the path of a packet through a network.E. A routing protocol operates at the transport layer of the OSI model.F. A routed protocol updates the routing table of a router.Ans: B, C
Explanation:
A routing protocol learns routes and puts those routes in a routing table. Examples of routing protocols are
EIGRP, OSPF, and BGP.
A routed protocol is the type of packet forwarded, or routed, through a network. Examples of routed protocols
include IP, IPX, and Appletalk.
Incorrect Anss:A. Routing protocols are assigned to routers. This Ans correctly describes a routed protocol.D. This describes the function of a routing protocol.E. Routing protocols operate at layer 3, which is the network layer, of the OSI model.F. This is a function of a routing protocol.
Q9
You work as a network administrator at CertKing . You install a new host on the CertKing network. You
want to verify the configuration of the new host by establishing an FTP connection to a remote server.
You CertKing trainee wants to know what the highest layer of the protocol stack is that you are using for
this operation.
What would your reply be?A. ApplicationB. PresentationC. SessionD. TransportE. InternetF. Data Link
G. PhysicalAns: A
Explanation:
Layer Name Examples
Layer 7 is the application layer, which is the highest layer in the OSI model. This layer describes the use of end
user applications, such as opening movie files (avi, mpeg, etc) used Microsoft Office applications, using WWW
browsers, using Telnet, and using FTP.
You are a Cisco Unity system administrator at CertKing . A CertKing subscriber
complains that their Cisco Unity server is returning busy signals during different times
of the day. Their Cisco Unity server is using Auto Attendant.
How would you determine what the possible causes of this problem are?A. Run the Busy Ports Report.B. Run the Ports Usage Report.C. Run the Notification Report.D. Run the Diagnostic Trace Report.E. Run the Subscriber Messaging Profile Report.Ans: B
Q33
Which report would you use to gather key information about your Cisco Unity server
such as the number of voice-mail ports, Cisco Unity's name on the network, and
licensing information?A. The Unity overview Report.B. The System settings Report.C. The Diagnostic Trace Report.D. The Licensing and ports Report.E. The System configuration Report.Ans: E
Q34
Tess, your newly appointed CertKing trainee wants to know what information the port
usage report provides.
What will your reply be? (Choose all that apply.)
|
CCIE
CCIE book
CCIE boot camp
CCIE boot camps
CCIE bootcamp
CCIE bootcamps
CCIE brain dump
CCIE brain dumps
CCIE braindump
CCIE braindumps
CCIE certification
CCIE certification
braindumps
CCIE certification exam
CCIE certification
training
CCIE class
CCIE course
CCIE exam
|
