CertificationKing  
References report once each week for four weeks and then every month after that.E. Leave the Cleanup Interval for Logger Data Files at the Default of 7 Days, then run the
Port Usage report once each week for four weeks.
Then increase the Cleanup Interval to 30 days and then run the Port Usage report every
month.Ans: C


Q25
Which of the following reports will allow you to identify which of the three Cisco Unity
administrators with differing levels of system access is responsible for changes to a
subscriber's account when a report came through to you that a subscriber suddenly lost
e-mail accessibility via a phone?A. Exchange System Manager.B. Exchange Access.C. Administrative Access.D. System Manager Feature Access.E. Active Directory Users and Computers (ADUC) Administration System Access.Ans: C


Q26
Which of the following reports will allow you to obtain information regarding the access
frequency of different call handlers on an extensive call handler touring plan?A. Call Routing.B. Call Handler Routing access.C. Call Handler Traffic.D. Call Handler Access.E. Routing and Remote Access.Ans: C

You work as network administrator at CertKing . Your non-Cisco certified assistant has been working on
Router CK1 . He incorrectly configured the router interface with a subnet broadcast address. You want to
remove the incorrect IP address and replace it with the first usable IP address for the same subnet.
Which set of commands will you issue?A. CK1 (config-if)# clear ip address 190.160.45.31 255.255.255.240
CK1 (config-if)# ip address 190.160.45.17 255.255.255.240B. CK1 (config-if)# no ip address 190.160.45.23 255.255.255.252
CK1 (config-if)# ip address 190.160.4.21 255.255.255.252C. CK1 (config-if)# no ip address 190.160.45.23 255.255.255.240
CK1 (config-if)# ip address 190.160.45.20 255.255.255.240D. CK1 (config-if)# clear ip address 190.160.45.23 255.255.255.0
CK1 (config-if)# no address 190.160.45.17 255.255.255.0E. CK1 (config-if)# no ip address 190.160.45.15 255.255.255.252
CK1 (config-if)# ip address 190.160.45.9 255.255.255.252Ans: A

Explanation:
To set a primary or secondary IP address for an interface, use the ip address interface configuration command.
To remove an IP address or disable IP processing, use the no form of this command.
Current Host Range = 190. 160. 45. 17 to 190. 160. 45. 30


Q17
Your CertKing trainee Jack wants to know what three TCP/IP Application layer protocols are.
What would you tell her? (Choose three.)A. ARPB. HTTPSC. SMTPD. CDPE. TFTPF. ICMPAns: B, C, E
Reference:
CCNA Self-Study CCNA ICND exam certification Guide (Cisco Press, ISBN 1-58720-083-X) Page 35


Q18
Three CertKing stores have decided to establish network connectivity. The stores have contracted a local
non Cisco certified technician. Not surprisingly, he failed to complete the job. No network connectivity
has been established between the routers. The routers are named CertKing 1, CertKing 2, and CertKing 3.
CertKing has decided to use more professional assistance and has hired you to fix the problems. Your
task is to identify the fault(s), and make the necessary change(s) to establish connectivity. The routers
have been configured with the following specifications:
The routers are named CertKing 1, CertKing 2, and CertKing 3.
RIP is the routing protocol.
Clocking signal is provided on the serial 0 interfaces.
The password on each router is " CertKing ".
The subnet mask on all interfaces is the default mask.
The IP addresses are listed in the chart below.
CertKing 1
E0 192.168.127.1
S0 192.168.131.1.
CertKing 2
E0 192.168.135.1
S0 192.168.133.1
S1 192.168.131.1
CertKing 3
E0 192.168.137.1
S1 192.168.133.2
To configure the router click on the host icon that is connected to a router by a serial console cable.Ans:

 

CCNA course
CCNA course online
CCNA cram exam
CCNA dumps
CCNA ebook
CCNA exam
CCNA exam question
CCNA forum
CCNA free guide study
CCNA job
CCNA lab
CCNA logo
CCNA online
CCNA online training
CCNA practice exam questions
CCNA practice exams
CCNA practice test
CCNA practice test questions
CCNA practice tests
CCNA questions
CCNA requirement