|
You are a network technician at CertKing . The CertKing network consists of two VLANS. The network is
shown in the following exhibit:
Ports 1 through 4 on each switch are assigned to VLAN1 and ports 5 through 8 on each switch are
assigned to VLAN2. An ISL trunk link connects the two switches. You want to test proper VLAN and
trunk operation.
Which of the following actions should you take? (Choose all that apply.)A. Host 2-1 can ping Host 2-2B. Host 2-1 can ping Host 7-2C. Host 2-1 can not ping Host 2-2D. Host 7-1 can not ping Host 2-2E. Host 7-1 can ping Host 7-2Ans: A, D, E.
Explanation:
A: Host 2-1 and Host 2-2 are both in VLAN1 and a ping should be successful.
D: Host 7-1 is in VLAN3 while Host 2-2 is in VLAN1. A ping between those hosts should fail.
E: Host 7-1 and Host 7-2 are both in VLAN1 and a ping should be successful.
Incorrect Anss
B: Host 2-1 and Host 7-2 are in different VLANs and a ping should fail.
C: Host 2-1 and Host 2-2 are both in VLAN1 and a ping should be successful.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 184 - 198 and 124.
Q20
You are a technician at CertKing . Your newly appointed CertKing trainee wants to know what the valid
options for Frame LMI types are.
What would your reply be? (Choose all that apply.)A. EIA/TIAB. Q.932C. q933aD. IEEEE. CiscoF. ansiAns: C E F
Explanation:
Name Document IOS LMI-Type Parameter
o Cisco Proprietary cisco
o ANSI T1.617 Annex D ansi
o ITU Q.933. Annex A q.933a
Reference:
CCNA Self-Study CCNA ICND exam certification Guide (Cisco Press, ISBN 1-58720-083-X) Page 382
Q21
You are a trainee technician at CertKing . Your instructor wants to know which of the following address
can be assigned to network hosts if the subnet mask 255.255.255.224 is used.
What would your reply be? (Choose three.)A. 15.234.118.63B. 92.11.178.93C. 134.178.18.56D. 192.168.19.37E. 201.45.116.159F. 217.63.12.192Ans: B, C, D
Explanation:
Valid Address Current host range
83.121.178.93 83.121.178.65 to 82.121.178.94
134.178.18.56 134.178.18.33 to 134.178.18.62
192.168.19.37 192.168.19.33 to 192.168.19.62
Which functions can you perform with the Cisco Unity Status Monitor when checking
your Cisco Unity server status? (Choose all that apply.)A. Check to see if the Unity Text to Speech engine is using kernel memory.B. Check to see if the Cisco Unity server is running or not.C. Check the system memory on the server.D. Determine if you want to have reports distributed directly to all system administrators.E. Determine if during shutdown of the server, you want to wait until all calls are
finished before the server goes down or you want to send a voice message before
terminating all calls.Ans: B, E
Q21
Which functions can you perform with the Cisco Unity Status Monitor when checking
your Cisco Unity server status? (Choose all that apply.)A. Check to see a list of call handlers in the system.B. Determine if the server is low on system memory.C. Check to see if there are any reports in the queue.D. Check to see whether the server is operational or not.E. Determine which ports on the Cisco Unity server are busy with active calls.Ans: C, E
Q22
You are the administrator of the CertKing Cisco Unity messaging system. You have been
requested to supply information regarding the number and length of calls placed by the
Unity system to subscribers for message notification during the past seven days.
Which of the following reports will allow you to comply with this request?A. Subscriber Message Billing.B. Notification Billing.C. Outcall Billing.D. Transfer Call Billing.E. Subscribe Message Activity.Ans: C
|
CCNP
CCNP book
CCNP boot camp
CCNP boot camps
CCNP bootcamp
CCNP bootcamps
CCNP brain dump
CCNP brain dumps
CCNP braindump
CCNP braindumps
CCNP certification
CCNP certification
braindumps
CCNP certification exam
CCNP certification
training
CCNP course
CCNP exam
CCNP job
CCNP lab
|
