You are the network administrator at CertKing . You need to perform password recovery on Router CK1 .
What must you modify in the password recovery process? (Choose two.)A. Configuration registerB. NVRAMC. Boot flashD. CMOSE. FlashAns: A, B

Explanation:
Recovering a Lost Password
This section describes how to recover a lost enable password and how to enter a new enable secret password.
Password recovery consists of the following major processes:
Determining the Configuration Register Value
o With this process, you determine the configuration of the router, so that you may restore the
configuration after the password is recovered.
Resetting the Router
o With this process, you reconfigure the router to its initial startup configuration. You then display the
enable password, if one is used.
Resetting the Password
o If you are using an enable secret password, you enter a new password with this process. You then restore
the router to its prior configuration.
Resetting the Configuration Register Value
o If you are using an enable password, you use this process to restore the router to its prior configuration.
Reference:
http://www.cisco.com


Q41
CertKing has decided to centralize their business by establishing network connectivity between their sites.
A local technician was contracted to configure the routers. However, he failed. No network connectivity
was established between the routers. The routers are named CertKing 1, CertKing 2, and CertKing 3.
CertKing hires you, a Cisco Certified network consultant, to troubleshoot and fix the problems. You must
identify the fault(s), and make the necessary change(s) to establish network connectivity.
The routers have been configured with the following specifications:
The routers are named CertKing 1, CertKing 2, and CertKing 3.
RIP is the routing protocol
Clocking is provided on the serial 0 interfaces.
The password on each router is " CertKing ".
The subnet mask on all interfaces is the default mask.
The IP addresses are listed in the chart below.
CertKing 1
E0 192.168.27.1
E1 192.168.29.1
S0 192.168.31.1
CertKing 2
E0 192.168.35.1
S0 192.168.33.1
S1 192.168.31.2
CertKing 3
E0 192.168.37.1
S1 192.168.33.2
To configure the router click on a host icon that is connected to a router by a serial console cable.
CertKing 1Ans:

Q7
On which of the following versions of Windows 2000 is Cisco Unity supported?A. Windows 2000 Server.B. Windows XP Professional.C. Windows 2000 Professional.D. Windows 2000 Advanced Server.E. Windows 2000 Datacenter Server.Ans: A


Q8
Which PBX features are required for Cisco Unity to support a full integration? (Choose
all that apply.)A. Message call service.B. Call message retrieval.C. Easy message access.D. Direct message retrieval.E. Message waiting indication.F. Call forward to personal greeting.
G. Negative positive LED status codes.Ans: C, E, F


Q9
Which PBX feature is required by Cisco Unity to perform release to switch transfers?A. Easy message access.B. Call message retrieval.C. Message waiting indication.D. Call forward to remote server.E. Call forward to personal greeting.Ans: E

Cisco practice exams
Cisco practice test questions
Cisco practice tests
Cisco questions
Cisco resume
Cisco salary
Cisco study guide
Cisco study material
Cisco test
Cisco test- Certification King
Cisco training
Cisco tutorial