|
Explanation:
Click on Host 2:
Router CertKing 1:
CertKing 1> enable
Password: CertKing
CertKing 1 # config terminal
CertKing 1 (config) # interface ethernet 0
CertKing 1 (config-if) # ip address 192.168.27.1 255.255.255.0
CertKing 1 (config-if) # no shutdown
CertKing 1 (config-if) # exit
CertKing 1 (config) # interface ethernet 1
CertKing 1 (config-if) # ip address 192.168.29.1 255.255.255.0
CertKing 1 (config-if) # no shutdown
CertKing 1 (config-if) # exit
CertKing 1 (config) # interface serial 0
CertKing 1 (config-if) # ip address 192.168.31.1 255.255.255.0
CertKing 3 (config-if) # clock rate 64000
CertKing 1 (config-if) # no shutdown
CertKing 1 (config-if) # exit
CertKing 1 (config) # router rip
CertKing 1 (config-router) # network 192.168.27.0
CertKing 1 (config-router) # network 192.168.29.0
CertKing 1 (config-router) # network 192.168-31.0
CertKing 1 (config-router) # Ctrl-Z
CertKing 1 # copy running-config startup-config
Click on Host 4
Router CertKing 2:
CertKing 2> enable
Password: CertKing
CertKing 2 # config t
CertKing 2 (config) # interface ethernet 0
CertKing 2 (config-if) # ip address 192.168.35.1 255.255.255.0
CertKing 2 (config-if) # no shutdown
CertKing 2 (config-if) # exit
CertKing 2 (config) # interface serial 0
CertKing 2 (config-if) # ip address 192.168.33.1 255.255.255.0
CertKing 2 (config-if) # clock rate 64000
CertKing 2 (config-if) # no shutdown
CertKing 2 (config-if) # exit
CertKing 2 (config) # interface serial 1
CertKing 2 (config-if) # ip address 192.168.31.2 255.255.255.0
CertKing 2 (config-if) # no shutdown
CertKing 2 (config-if) # exit
CertKing 2 (config) # router rip
CertKing 2 (config-router) # network 192.168.35.0
CertKing 2 (config-router) # network 192.168.33.0
CertKing 2 (config-router) # network 192.168.31.0
CertKing 2 (config-router) # Ctrl-Z
CertKing 2 # copy running-config startup-config
Router CertKing 3:
Click on Host6
CertKing 3> enable
Password: CertKing
CertKing 3 # config t
CertKing 3 (config) # interface ethernet 0
CertKing 3 (config-if) # ip address 192.168.37.1 255.255.255.0
CertKing 3 (config-if) # no shutdown
CertKing 3 (config-if) # exit
CertKing 3 (config) # interface serial 1
CertKing 3 (config-if) # ip address 192.168.33.2 255.255.255.0
CertKing 3 (config-if) # no shutdown
CertKing 3 (config-if) # exit
CertKing 3 (config) # router rip
CertKing 3 (config-router) # network 192.168.33.0
CertKing 3 (config-router) # network 192.168.37.0
CertKing 3 (config-router) # Ctrl-Z
CertKing 3 # copy running-config startup-config
Q3
You are a system administrator at CertKing . CertKing is running the Unity Telephone
Integration Manager (UTIM).
Your newly appointed CertKing trainee wants to know what you would configure during
a Cisco CallManager integration.
What will your reply be?A. The CallManager IP address, the failover CallManager IP address, the device naming
convention, and the MWI on and off codes.B. The device name and the MWI on and off codes. The CallManager IP address is not
needed as long as they are on the same subnet.C. The CallManager IP address and the MWI on and off codes are configured. The
failover IP address is added as a second integration in the UTIM.D. The CallManager IP address and the failover IP address of the second CallManager.
The device naming prefix and the MWI on and off codes are not configurable.Ans: A
Q4
You are the network administrator at CertKing . CertKing has a third-party voice-mail
system and a Cisco Unity server. You want to enable the two voice mail system to
exchange messages.
What protocol should you use to accomplish this task?A. The x400 protocol.B. The OSPF Protocol.C. The AMIS protocol.D. The IMAP protocol.E. The PIMG Protocol.
|
Free CCNA
Free CCNA book
Free CCNA books
Free CCNA braindumps
Free CCNA exam
Free CCNA lab
Free CCNA practice exam
Free CCNA practice test
Free CCNA question
Free CCNA semester
2 cheat exam
Free CCNA study guide
Free CCNA test
Free CCNA training
Free CCNA tutorial |
